|
Air hose system Ø225 mm:
The Ø225 mm air hose system is used in conjunction with mobile ACM 7 for cooling of tents. The Ø225 mm air hose system consists of insulated as well as uninsulated air distribution hoses.
|
Insulated, flexible air hose Ø225 mm, 3 m long
(A on above drawing):
This hose is connected to the cooling unit on one end and to the tent duct opening on the other. When not in use, it can be packed away in the separate compression bag.
|
 |
|
Storage bag for insulated air hose Ø225 mm:
For storage and transport of the insulated air hose.
|
 |
|
Non-insulated, flexible air distribution hose Ø225 mm, 6 m long
(C on above drawing):
This hose is used to distribute the cold air inside the tent. The air outlet is through small holes, placed at 2 o'clock. The hose is suspended under the ceiling of the tent.
|
|
|
Air hose system Ø315 mm:
The Ø315 mm air hose system is used in conjunction with ACM 7 with Ø315 hose connections. The Ø315 mm air hose system consists of insulated as well as uninsulated air distribution hoses.
|
|
Insulated, flexible hose Ø315 mm, 3 m long
(A on above drawing):
This hose is connected to the unit on one end and to the tent opening on the other end. When not in use, it is packed away in a bag, which is sewed to the hose.
|
 |
|
Non-insulated, flexible hose Ø315 mm, 2 m long
(B on above drawing):
This air hose is used to bring the cold air from the insulated hose to the air distribution hose which is mounted under the tent roof.
|
 |
|
Non-insulated, flexible air distribution hose Ø315 mm, 5 m long
(C on above drawing):
This hose is used to distribute the cold air inside the tent. It has two rows of air outlet openings on the upper side. The air hose is mounted under the tent roof. When not in use, it is packed away in a bag.
|
|
|
Air hose system Ø400 mm:
The Ø400 mm air hose system is used in conjunction with ACM 18 and ACM 18 CBRN mobile cooling units for cooling of tents. The Ø400 mm air hose system consists of insulated as well as uninsulated air distribution hoses.
|
|
Insulated, flexible hoses Ø400 mm, 3 m long
(A on above drawing):
This hose is connected to the cooling unit on one end and to the tent opening on the other. When not in use, it is packed away in a bag.
|
 |
Non-insulated, flexible hose Ø400 mm, 5 m long
(B on above drawing):
This air distribution hose is used to bring the cold air from the insulated hose to the air distribution hose which is mounted under the tent roof.
|
|
|
Non-insulated, flexible air distribution hose Ø400 mm, 5 m long
(C on above drawing):
This hose is used to distribute the cold air inside the tent. It has two rows of air outlet openings on the upper side. The air hose is mounted under the tent roof. When not in use, it is packed away in a bag.
|
|
Room thermostat
(D on above drawing):
There are two different types of room thermostat for Dantherm mobile air conditioners. One for standard air conditioners and one for air conditioners with built in heating element. They will normally be placed inside the tent to control the Dantherm air conditioner which is placed outside. They are built into a water and dust tight enclosure (IP 66) and are supplied with a 15 m cable.
|
  |
|
Trap door system for ACM 5:
The trap door serves as protection against rain and extreme sun when the ACM 5 is operating.
|
|
